How to Install Your Garage Door?

So you want to install your garage door and give a break to the heavy, creaking hinges that have been a part of the previous one. This is how it is easily done. First the weatherstrip is fixed on the ground side of the board which is lifted into position and perfectly aligned to the door way. Then, using a claw hammer, several nails are pushed into the panel to link it with the wall.

The rollers are then inserted in vertical perspective on both sides of the entrance. Then the second panel is placed using the same process. The hinges of the first board are fastened to those of the second part using a screw driver. The third board is then inserted using the same process as above. The handles can be inserted in between before finally putting the top and horizontal plates into position. The door is then pulled to several feet to check on its soundness.